Monday, May 7, 2012

Learn to create the corporate glossy text effect

Ever envied these logos for their professional and subtle glossy effect? No more! Because in the next 20 minutes, you will be able to make your own logo with the same effect :) So here we go...

Step 1

Lets starts by creating a new document in Photoshop. (File>New) Alternately, you may even press Ctrl+N. I am using 640x400 px, 72dpi, RGB 8bit, white background. Once you are done filling in the parameters, go ahead and click ‘Ok’. A new blank document opens in the work area.

Step 2

Next, select the Horizontal Type Tool and Type in your name in the work area. I am using 'design club' instead of my name. Go to Windows>Character to make the Character panel visible. Type in your name with any font you like, preferably a thick/bold one. I have used the font Ubuntu, bold, 55 size and (-50) character spacing. The font size depends on how big you want your logo to be.

Step 3

Select the Pen Tool and draw a path as shown in the screenshot. The way the pen tool works may seem a little counter intuitive to the first time users. Start by clicking at any point in the work area. Now when you click on some other point, Photoshop creates a straight line joining these two points. In the second point, instead of just clicking, if you click and drag, you get a curve. Play around with it for a while and you will get it.
Now, Ctrl+Enter to convert this path into a selection. Now while this selection is active, press and hold Shift+Ctrl+Alt and click on the text layer of your name. This will make a selection around the intersection of the path you have made using the pen tool and the text layer of your name. If you do it correctly, you will get something like this.

Step 4

Now, we have to fill this selection with a suitable linear gradient. Select Black as the foreground colour and any Dark Gray as the background colour. I have used #414141 for the background gray. Select the gradient tool and select the linear gradient mode at the top. Now create a new layer above the text (name) layer. With the gradient tool selected, click at the bottom of the text and drag it till the middle of the text.
In the screenshot, the gradient is not quite visible. But when you do it yourself, it will be visible in your screen.

Step 5

Now, we need to do the same thing with the other half of the text as well. Go to the Paths tab (Windows>Paths if it is not visible by default) press and hold Ctrl and click on the Work Path thumbnail. This will again create the selection you had before. Press Ctrl+Shift+I to invert the selection. Now while this selection is active, press and hold Shift+Ctrl+Alt and click on the text layer of your name. This will create a selection around the remaining half of the text.

Step 6

Now, we have to fill this selection with a suitable linear gradient. Select #3c393b as the foreground colour and  #757577 as the background colour. Select the gradient tool and select the linear gradient mode at the top. Now create a new layer above the text (name) layer. With the gradient tool selected, click at the tittle of 'i'  and drag it till the middle of the text.

Step 7

Now select the the layers in the layer palette which contains the two halves of the text gradient, by pressing Ctrl, just like you select multiple icons in Windows. Press Ctrl+E to merge them.

Step 8

Right click on the recently merged layer in the layer palette and select Blending Options. Select Drop Shadow and enter these parameters.

Your logo is ready. Get ready to flaunt it! Dont forget to share it with us in our Facebook page http://www.facebook.com/DesignClubIITM. Happy Designing.

Saturday, May 5, 2012

Learn to make our logo


Hi friends, this is my first post and as I ve promised I am going to teach you how to make the logo of Design Club, so here I go.

I believe a good design should be always simple, precise, clean and straight to the point. Personally, I feel that using a few basic, simple shapes and colours is the best way to reach your audience and convey the right message - because you are trying to say something without artifice or special effects. When it comes to a logo, it should be an appetizer, not the whole buffet! Our logo is not an exception. It has just one kind of shape. A Circle, that’s it! So, if you have ever opened MS Paint and drawn a circle, you are equally capable of doing it. So let’s start.

Step 1

First, we need to create a new document in Photoshop. (File>New) Alternately, you may even press Ctrl+N. I am using 1280x800 px, 96dpi, RGB 8bit, white background. I wish to use it as my desktop wallpaper that’s why I have used 1280x800. You may go ahead and use the screen resolution of your own comp. Once you are done filling in the parameters, go ahead and click ‘Ok’. A new blank document opens in the work area.

Step 2

Next, we select the Elliptical Marquee tool and draw a perfect circle. Perfect circle can be drawn by pressing and holding shift, just like in MS Paint. (Please note that instead of Elliptical Marquee, the Rectangular Marquee tool may be present by default. Click and hold on the Marquee tool icon to select the Elliptical Marquee tool. Check out the screenshot).

Step 3

Click on the colour swatch at the bottom of the left tools panel and select a dark shade of red (#7f030b). You may directly type in the hex code of the colour (without the #) which is used in the logo.

Step 4

Click on the ‘Create new layer’ button on the layer palette at the right (If layer palette is not visible by default press F7) and fill in the red colour using the Paint Bucket tool. (Please note that instead of the Paint Bucket Tool, the Gradient tool may be present by default. Click and hold on the  tool icon to select the Paint Bucket Tool. Check out the screenshot). The circle which you have made using the Marquee tool is just a demarcation which decides the area where the colour will be filled. The same Marquee tool can be used to select any area / shape etc in Photoshop. The selected thing can then be filled with colour, deleted, cut, copied etc.


Step 5

Now, we just need to make some concentric rings and we are done. The easiest way to make a ring is to make two concentric circles of two different sizes in two different layers and delete the region of the smaller circle from the bigger one. To create concentric circles just duplicate the layer in which the red circle is present by pressing Ctrl+J. When you duplicate the layer, it won’t be visible in the work area because both the circles will be exactly same and they will be in the same position. You may change the colour of the duplicate circle to differentiate it from the original. I ll go ahead and make it black. 

Go to the Duplicate Layer on the layer palette. Press and hold Ctrl and click on the layer on the layer palette. This will make a selection around the circle, a similar one which you have made using the Elliptical Marquee tool. Now fill it with black. Now we will reduce the size of the black circle. Press Ctrl+T and you will be able to resize the circle just as you do it in MS Word. To keep it concentric press and hold Shift+Alt. Once you are done with the resizing, go ahead and press Enter.
Now, we again press and hold Ctrl and click on the layer of the small black circle on the layer palette. This will again make a selection around the circle. Now, click on the layer of the red circle on the layer palette. When the selection is still active, press delete. This will remove the area of the small black circle from the big red circle. Now, you can completely delete the layer of the black circle and you are left out with a red ring.

Step 6

Similarly create another ring and place both them like the way they are placed in the logo. So now the layer palette has 3 layers. The red circle, Ring 1 and Ring 2.

Step 7

Now we just have to reduce the opacities of the individual layers. Set the opacity of the layer of the red circle to 70%. Ring 1 to 50% and Ring 2 to 20%. 

Step 8

Now select all the three layers in the layer palette by pressing Ctrl, just as you select multiple icons in Windows. Once selected, press Ctrl+G to group the 3 layers. (Grouping is not mandatory; it is just for better organization. It is similar to creating a folder in Windows) Now 'group 1' has the red elements. Similarly create 3 more groups for the Blue, Green and Yellow circles. You may re-size a  group by pressing Ctrl+T. You may use #538ba5 for blue, #90bd52 for green and #ecbd0f for yellow.
Selecting the 3 layers

Grouped Layers

Step 9

After creating all the 4 groups, place them in their proper positions.

Step 10

Go to Windows>Character to make the Character panel visible. Type in ‘design’ with Century Gothic font, bold, and (-75) character spacing. The font size depends on how big the circles which you have made are. I have used Ctrl+T to resize the text layer to best fit into the logo. Similarly, type ‘club’ with Century Gothic font, bold, and (-50) character spacing and align the two words so that ‘i’ in 'design' lies in the same vertical line with the ‘l’ of 'club'. Now we will make some minor changes to the words so that they become unique. 
Please note that a text layer is not directly editable because it in the vector mode. We need to convert it to the raster (pixel) mode. To do this we select the text layers, right click on them and select ‘Rasterize type’.


Step 11

Next, select the ‘l’ of ‘club’ using the Rectangular Marquee tool and delete it. Now, we select a small part of the ‘i’ of ‘design’ using the Rectangular Marquee tool, press Ctrl+T and extend the ‘i’ to form the ‘l’ of ‘club’. Similarly, extend the ‘b’ of club to merge with the ‘n’ of design. Now select the layers, design and club, in the layer palette and press Ctrl+E to merge them. Now type ‘the’ and ‘iitm’ and place them in appropriate places. Rasterize ‘the’ and extend the ‘t’ and ‘h’ of ‘the’ beyond the red circle. Now merge all the 3 layers again by pressing Ctrl+E.

Step 12

Next, Select the four groups, Groups 1 – 4, and press Ctrl+E to merge them. So, now you are left out with just 2 layers in your palette, the layer with the text and the layer with the circles. 

Step 13

Now, press and hold Ctrl and click on the text layer in the layer palette to make a selection around the text. Now while the selection is active, go to the circles layer and press delete!
Now, go to the text layer and completely delete the whole layer by clicking on the delete button and Tada... you have successfully made the logo!

Step 14

Now let’s give it a wallpaper look by applying a subtle gray gradient in the background. Resize your logo and place it in the centre of the wallpaper (or any other area of your choice). Select white as the foreground and any light gray as the background colour. I have used # dbdbdb. Select the gradient tool and select the radial gradient mode. Now create a new layer below the logo layer. With the gradient tool selected, click on the centre of the wallpaper and drag it to any one of the corners to fill in the new layer with the radial gradient.
If you feel the logo is looking very pale just duplicate the logo layer by pressing Ctrl+J and set the blending mode of the new layer to ‘Multiply’. This will brighten it up. 
Once you follow all these steps, you should get something similar to the image below. This concludes our tutorial. I advise you to experiment with this logo by applying your own touch of style to it, and make sure you show off your work in our Facebook page http://www.facebook.com/DesignClubIITM. I hope that you've learnt something new from my tutorial, feel free to email us on designclubiitm@gmail.com.